ClearOne NetStreams DigiLinX Dealer User Manual
Page 9
Introduction
1-1
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Chapter
1
Introduction
The NetStreams
®
DigiLinX™ IP-Based Multi-Room Audio and Video Distribution
and Control system streams audio, video, control, and metadata over TCP/IP on an
Ethernet network.
DigiLinX is a decentralized system. This means that different computer processes are
distributed between the various devices in the network. This manual covers
configuration of these devices.
DigiLinX Dealer Setup
The NetStreams DigiLinX Dealer Setup is a PC-based interface that can be used to
configure all DigiLinX products and legacy devices. For DigiLinX installation
instructions, see the DigiLinX Installation and Design Guide.
IMPORTANT!
The DigiLinX Dealer Setup Program only works over a wired
connection to the switch. DO NOT use a wireless connection to run the
program.
IMPORTANT!
The DigiLinX Dealer Setup Program will not work properly if it is not
connected directly to a NetStreams SwitchLinX™ or Qualified 3rd
Party Switch.
IMPORTANT!
Properly label all cables on the front end to facilitate installation.
Manuals
All NetStreams manuals can be downloaded by authorized NetStreams dealers from
the Dealer section of the NetStreams website at
.