ClearOne NetStreams DigiLinX Dealer - Manual (Page 329)

IP Intercom
18-3
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 18-3 Advanced Options screen
The Advanced Options screen allows you to edit settings as shown in Table 18-1.
Table 18-1
IP Intercom Advanced Options
Screen Selection Description
Advanced Options Enable Intercom for this Room Turns the intercom on or off in a room.
Default Mic Lets you choose which device's microphone to use.
Default Volume Allows you to adjust the intercom volume level.
Privacy Includes the following options:
 Default DnD - when the system is restarted, means that
the room is accepting no incoming intercom calls.
NOTE:You can change this setting from the TouchLinX by
pressing DnD on or off. If a KL200 is involved and
DnD is on, the DND light on the KL200 will light up.
 Default Privacy - when the system is restarted, the room
cannot be monitored.
NOTE:You can change this setting from the TouchLinX by
pressing Privacy on or off. If a KL200 is involved and
Default Privacy is on, the DND light on the KL200 will
light up.
 Enable Monitor - when selected, you are able to monitor
that room
 Allow DoorLinX Calls - when selected, it allows DoorLinX
calls.