Theaterlinx settings tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 201
Editing Devices
5-131
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
2.
Click on the Settings tab. The Settings tab appears as shown in
Table 5-93
TheaterLinX Settings Tab
Tab
Selection Description
Settings
TheaterLinX Name
Allows you to name the TheaterLinX.
AVR Name
Allows you to name the Audiio Video Receiver.
Enable Front IR Receiver
This checkbox either enables or disables the front IR
receiver.
Who should handle the volume? ????????
Input Select
Sets which audo input type the TheaterLinX will receive
audio from the AV receiver. Select from either:
Analog (24 bit ADC) Input
Digital (S/PDIF) Input
Input Level
Raises or lowers the input level. Select from 0db to -12db (in
3 db increments).
AVR Power Sensor
Select what method the TheaterLinX will use to detect if the
AVR is powered ON. Choose from:
None
Level
LED
Video Sync
Display Power Sensor
Selects from what method the TheaterLinX will use to detect
if the display is powered ON. Choose from:
None
Level
LED
Video Sync