ClearOne NetStreams DigiLinX Dealer - Manual (Page 95)

Editing Devices
5-25
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
2. After adjusting information on the Info page, select Apply.
MLA4000 Slots Tab
The MediaLinX MLA4000 is a highly configurable device. There are five hardware slots on the rear of the unit.
One of these slots (slot 5) is a ControLinX. The other slots (slots 1 through 4) can serve as either a MediaLinX or
a ControLinX. The installer can define how they want the slot to work on this screen.
1. Select the Slots tab.
The Slots tab information displays (see Figure 5-22).
Table 5-14
MediaLinX MLA4000 Info Tab
Tab Selection Description
Info Current IP Address The current IP address of the MediaLinX.
Current Subnet Mask The current subnet mask of the MediaLinX.
Device Type The type of DigiLinX device that this is.
Model Number The NetStreams MediaLinX model number.
Firmware Version What firmware version is currently running on the MediaLinX.
Device Name Descriptive name the installer assigned to the device when
creating the project.
Override Changes the default device name. Keep unchecked in most
instances.
Serial Number Displays the MediaLinX serial number.
Device Comments Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary
Slots 1-5 Shows the five slot assignments for the ControLinX
MLA4000.
Show Advanced Options Normally used for advanced configurations. Typically, the
installer will not use this screen.