Controlinx and secant, Controlinx and secant -65 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 135
Editing Devices
5-65
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Once all scenes have been added, use the up and down arrows located under the menu listing to adjust the order
the scenes are presented in.
After adjusting information, select Apply.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab for a ControLinX Contained in a MLA4000
on page 5-32.
ControLinX and Secant
To edit ControLinX settings for the Secant security system, complete the following steps:
1.
Using the NetStreams RS232 cable (included with the ControLinX), connect 3.5mm phono connector of the
RS232 cable to the ControLinX.
2.
Connect the other end of the cable (DB-9) to the RS232 port on the Secant unit.
3.
Click on the ControLinX in the MediaLinX MLA4000 you want to edit in the project.
The IR/RS232 Settings tab for the ControLinX hosting Secant displays in the right side of the window (see
Figure 5-53).
Table 5-42
Menu Tab
Tab
Selection Description
Menu
List of Rooms
Select the room from the list of rooms for the phantom
buttons.
Available Scenes
Select the scene and select the right arrow to move the
scene to the room.
<Room>
The name of the room for which you are enabling scenes.