Editing devices, Editing media servers, Chapter 5 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 71: Editing devices -1, Editing media servers -1
Editing Devices
5-1
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Chapter
5
Editing Devices
At this point in the configuration, you’ll be customizing device configurations for this project. Complete steps in
the following sections.
Editing Media Servers
Adjust the settings for the media servers connected to the DigiLinX system.
IMPORTANT!
To ensure that changes are applied, click outside the field after you’ve entered information. This
saves your changes to the system.
1.
Click on the digital media server in the project.
The Info tab for the digital media server displays in the right side of the window (see Figure 5-1).
NOTE:
This example shows a Streaming Music Manager, but Imerge and Escient are also supported. Information
on how to configure the Streaming Music Manager is available in Chapter 15, DigiLinX Streaming Music
Manager.
NOTE:
There is a difference in the displayed information depending on whether a device has been matched or
not. In this case, we are showing a matched media server.