ClearOne NetStreams DigiLinX Dealer - Manual (Page 248)

DigiLinX Dealer Setup Version 2.35.00
9-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 9-2 Advanced Options screen
The following is the recommended address range for this example to configure
DigiLinX to use.
4. Set the System IP address range to: 192.168.0.51 - 192.168.0.200
5. Set the Subnet Mask to: 255.255.255.0.
See Figure 9-3.
Figure 9-3 Advanced Options screen with IP address set
6. Select Apply Changes.
You are warned that changes may affect the system adversely. See Figure 9-4.
Figure 9-4 System Warning
7. Select OK.