Editing information, Editing information -5 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 303
DigiLinX Streaming Music Manager
15-5
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 15-5
Selecting a device from the list
8.
Highlight the SMM100 in this list and select OK.
A message displays asking if you want to change the IP address in the project to
reflect the IP address of the actual media server (see Figure 15-6).
Figure 15-6
IP address prompt
NOTE:
If the IP address entered into the project for the SMM100 does not match the IP
address that the SMM100 is currently using, DigiLinX Dealer Setup will
display a warning message. Selecting NO will change the IP address currently
being used by the SMM100 to the address entered in the project. Selecting YES
will change the IP address in the project so it matches the IP address currently
being used by the SMM100.
The device appears in the device list with a yellow exclamation mark next to it that
indicates the SMM100 has been properly matched, but needs configuration.
Editing Information
To edit information for the SMM100, highlight the SMM100 in the device list so that
the Info tab displays (see Figure 15-7).