Caution – Toshiba SX 2000 User Manual
Page 147
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapt.4 Installation and Wiring
NOTE
(1) After installing the modules, secure the bases so that it can be mounted vertically, including
when in transport.
Æ
CAUTION
1. Install the S2T modules - power supply, CPU, direct I/Os on the dedicated base.
Do not use any modules of the S2T for the purpose other than specified. This can cause
electrical shock or injury.
2. For safety, always turn power OFF before installing and removing modules or installing and
removing terminal blocks.
3. Entering wire scraps or other foreign debris into to the S2T and related equipment can cause
fire or malfunction. Pay attention to prevent entering them into S2T and relatde equipment
during installation and wiring.
4.
Check for proper connections on wires, connectors and modules. Insufficient contact can
cause malfunction or damage to the S2T and related equipment.
B
1 3 0
Sequence Controller S2T