Power supply module, Installing/removing of the module cover – Toshiba SX 2000 User Manual
Page 148
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4.3.2
Installing/removing of the module cover
■ Expansion interface
4.3 Mounting the Modules
(1) Push the mark on the top
of module cover.
(2) Remove the cover,
hanging the bottom as
supporting point.
* Hang the bottom hook of the cover at first and lock the top when installing.
■ Power supply module
(1) Push the mark on the bot
tom of module cover.
(2) Remove the cover, hanging
the top as supporting point.
B
* Hang the top hook of the cover at first and lock the bottom when installing.
6F8C0926
1 3 1
Advertising