Toshiba SX 2000 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(4) Reset operation
By setting S068F to ON, resetting the free ASCII mode operation is available.
During the reset, the following re-initialization is processed.
• Initializes the serial port (RS-485)
• Initializes the receive buffer and the receive error information
• Resets the trailing code based on the data of lower byte of SW068
When the reset operation is completed, S068F is automatically reset to OFF.
The free ASCII mode operation should be re-started after confirming S068F is
returned to OFF.
1.4 Free ASCII mode
NOTE
If S068F is set to ON during a message receiving, the reset operation is started after the
message receiving is finished.
6F8C0926
39