Toshiba SX 2000 - Manual (Page 71)

Chapt.1 System Configuration
1.6 Power Supply Module
Power supply modules are mounted on the second slots from the left-end of all
bases.
There are two types according the power voltage and total power. Select one as
required.
Configure the system, referring to the module current consumption table in the
Section 1.18.2, so that the following equation is satisfied.
Maximum power consumption >
5V * Total 5V current + 3.3V * Total 3.3V current
+ 24V * external 24V current
1.6.1 Power Supply Module
There are t hree type modules as follows.
Nominal
Input Voltage
Output Rating
Weight
(approx.)
Type
Internal control supply
External power
supply
Power
consumpBcn
PS691
AC100-120V
AC200-240V
(+10%,-15%)
5V-8A, 3.3V-1 .OA None
Less then
43W
650g
PS693
AC100-240V
5V-7A, 3.3V-1 .OA
DC24V
(±10%)0.8A
Less then
35W
600g
PS694
(+10%,-15%)
5V-6A,3.3V-1.0A None
Less then
35W
600g
PS632
DC24V
(+20%,-15%)
5V-7A, 3.3V-1 .OA None
Less then
35W
600g
PS652
DC100/110V
(+10%,-15%)
5V-7A, 3.3V-1 .OA None
Less then
35W
600g
1 ll^ll 1 1 ll/^ll 1
T08HBA PS693
Fig.1-6-1 Power Supply Module front view
54 Sequence Controller S2T