5 checking input – Toshiba SX 2000 User Manual
Page 175
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Chapt.6 Troubleshooting
6.5 Checking input
If the program is running, but the input signal is not read normally, check the follow
ing points:
Check the input voltage at
ON/OFF when the LED is
abnormal.
When identical, the internal function
is normal. The input circuit of the
module may have a problem.
Check the installation of that input
module. The input module may have
Check the connection of the
expansion cable. The expansion
interface module may have a problem.
The CPU module is abnormal.
158
Sequence Controller S2T
Advertising