Futaba 3VCS - Manual (Page 100)

101
Reference
Reference
Ratings
*Specifications and ratings are subject to change without prior notice.
Transmitter T3VCS
(2 sticks system, 3 channels)
- Transmitting frequencies 27, 29, 40,
or 41MHz band
(TZ-FM RF module used)
- Modulation FM
(HRS/PCM/PPM switching pos-
sible)
- Power requirement
(Ni-cad battery)
NT8F700B Ni-cad battery (9.6V)
(Dry cell battery)
Penlight x 8 (12V)
- Current drain 300mA or less
Receiver R113iP
(3 channels, PCM receiver)
- Receiving frequencies 27, 29, 40, 41
or 75MHz band
- Intermediate frequency 455kHz
- Power requirement 4.8V or 6V
(shared with servos)
- Current drain 18mA
- Size 42.7x28.7x16.0mm
(1.69x1.13x0.63in)
- Weight 21g (0.74oz)
Receiver R203HF
(3 channels, HRS receiver)
- Receiving frequencies 27, 29, 40, 41
or 75MHz band
- Intermediate frequency 455kHz
- Power requirement 6.0V
(shared with servos)
- Current drain 14mA
- Size 25.6x37.7x14.3mm
- Weight 17g
In case of the High Response Sys-
tem (H.R.S) receiver R203HF, al-
ways use only the following condi-
tions:
Servo; 6V type Digital Servo only
Power supply; 6V Nicd battery
Transmitter setting; "HRS" mode
If the conditions are different, control is impossible.
And Fail Safe Unit (FSU1) is not available.
Caution