Futaba 3VCS - Manual (Page 34)

35
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the or button to
select the setup item.
* blinks at the current
setup item.
(Initial screen)
MENU
100%
Setup items
ST-LFT : Steering (left side)
ST-RGT : Steering (right side)
TH-FWD : Throttle (forward side)
TH-BRK : Throttle (brake side)
3C-UP
: 3rd channel (up side)
3C-DWN : 3rd channel (down side)
Adjustment range
0~120% (each channel, each direc-
tion)
Adjustment buttons
- Use the (+) or (-) buttons to make ad-
justments.
- Return to the initial value by pressing
the (+) or (-) buttons simultaneously
(approx. 1 sec).
Steering (EPA) adjustment
(Preparation)
- Before setup the steering wheel steering angle, set the
steering D/R dial (initial setup: BT1) to the maximum
steering angle position 100%.
- Select setup item "ST-LFT" and make the following
adjustments:
1 Steering (left side) adjustment
Turn the steering stick fully to the left and use the
(+) or (-) buttons to adjust the steering angle.
2 Steering (right side) adjustment
Turn the steering stick fully to the right and use
the (+) or (-) buttons to adjust the steering angle.
3 When adjusting the steering angle of another
channel immediately after this, see the adjust-
ment method for that channel. When ending ad-
justment, return to the initial screen by pressing
the (END) button three times.
Setup item switching
- Use the (DN) or (UP) buttons to
switch the setup item
- Others switch the setup item (direc-
tion) linked to the steering wheel.
End point adjuster/EPA (All channels)