Futaba 3VCS - Manual (Page 57)

58
Functions
Timer/TIMER
UP TIMER
DOWN TIMER
Use the timer by selecting one of the four timers UP TIMER, DOWN TIMER, LAP
TIMER and LAP NAVIGATE timer.
Timer/TIMER
UP TIMER function
- The UP TIMER can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch is operated and
accumulates the time between each start and stop. (When the count reaches 99 min-
utes 59 seconds, it returns to 00 minutes 00 seconds and repeats the count.)
- The first start operation can be linked to the throttle stick.
- An alarm sound can be set. The passage of time is announced by sounding of a
buzzer ([pee] sound) each minute after starting.
Alarm: Generates a [pee] sound at the set time (min-
utes).
Prealarm: Alarm advance announcement sound.
Sounding starts the set time (seconds) before the alarm.
(PeePeePee, PeePeePee, -----)
- After starting, the timer is enabled and can be stopped by switch even when the
display switches to another screen.
DOWN TIMER function
- The DOWN TIMER can be used to count the time between start and stop, etc. (The
time remaining is displayed.)
- Start and stop are repeated at each switch operation and the time between each start
and stop is counted down and displayed. The start time becomes the alarm set time.
(When the count reaches 00 minute 00 second, the down timer operates like an up
timer.)
- The first start operation can be linked to the throttle stick.
- An alarm sound can be set. The passage of time is announced by sounding of a
buzzer ([pee] sound) each minute after starting.
Alarm: Generates a [pee] sound at the set time
(minute).
Prealarm: Alarm advance announcement sound.
Sounding starts the set time (seconds) before the alarm.
(PeePeePee, PeePeePee, -----)
- After starting, the timer is enabled and can be stopped by switch even when the
display switches to another screen.