Futaba 3VCS - Manual (Page 23)

24
Before Using
DT1
DT2
* Function names and rate
assigned to dials are dis-
played.
* Displays whether or not a data
pack is inserted. When a data pack
is inserted, "DPAC" is displayed. * "BLHT" is displayed when back-
lighting is ON.
* When radio waves are being emit-
ted, "RF" is displayed. When radio
waves are
not being emitted when turned on by
display switch and when the DSC
function is used, "DISP" is dis-
played. * The current operation mode is dis-
played. ("PPM"/"PCM"/"HRS")
DT3
BT1
BT2
KNOB
(END) button
Display when power switch turned on
Power switch turned on
Beep confirmation sound is generated and
the initial screen shown below appears.
Total timer display (H:M)
User name display
When the (END) button is held down for 1 second or longer at the initial screen, the
Futaba logo and user name are displayed for about 2 seconds.
Battery voltage display
Model name (10 characters)
* Display mode can be changed
by using the SYSTEM function.
(See pge 92)
Steering trim display
Throttle trim display