Futaba 3VCS - Manual (Page 102)

103
Reference
Battery Holder (Transmitter)
This battery holder is necessary when using the transmitter with a dry cell battery.
For a description of how to install the battery holder to the transmitter, see "Ni-cad
Replacement" on page .
Part name
3VC transmitter battery holder
(Penlight cell x 8)
Insert the batteries in the correct po-
larity.
If the polarity is incorrect, the transmitter may be
damaged.
When the transmitter is not in use,
remove the batteries.
If the battery electrolyte leaks, wipe off the case and
contacts.
Caution
<Check>
Turn on the power switch and check the LCD battery voltage display. When the
batteries are new, the voltage should be about 12V.
If the voltage does not rise, check for faulty contact or incorrect polarity.
<Processing the Dry Cell Batteries>
The method of processing used dry cell batteries depends on the area in which you
reside. Process the batteries in accordance with the processing method for your area.
CAMPac-16K / Data Pac DR-16K
When the CAMPac-16K is used, the model data for ten model can be saved, in addi-
tion to the ten model memories provided with the transmitter. Since the CAMPac-
16K can be freely carried as a separate unit, the saved data can also be used with other
3VCS transmitters. Do not use any removable memories other than CAMPac-16K.
Part Name
CAMPac-16K