Futaba 3VCS - Manual (Page 73)

74
Functions
Fail safe function
ST
: Steering setting
TH : Throttle setting
CH3 : Channel 3 setting
Function ON/OFF
OFF, ON
Initial value: OFF
Fail safe function/FAIL SAFE
Fail safe function setup
(Preparation)
- Select the channel to be set.
1 (Servo position setup)
When the fail safe function operates, the steering
stick, the throttle stick or channel 3 knob remains
in the desired operation position. When the (+)
and (-) buttons are pressed simultaneously for
about 1 second, the servo position is displayed
and you can confirm that the function was set.
When you want to release the setting, press the
(+) or (-) button for 1 second. "HOLD" is dis-
played.
(Each channel can be set similarly.)
2 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Battery fail safe function ON/OFF (PCM only)
(Preparation)
- Select setup item "MODE".
1 (Battery fail safe function ON/OFF)
The function can be switched by pressing the (+)
or (-) button.
2 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.