Futaba 3VCS - Manual (Page 50)

51
Functions
Forward acceleration amount
0~100
Initial value: 0
Brake side acceleration amount
0~100
Initial value: 0
3rd channel brake side acceleration
amount
0~100
Initial value: 0
3rd channel Brake
Throttle acceleration adjustment
(Preparation)
- Select setup item "FWRD" and make the following ad-
justments.
1 (Forward acceleration amount adjustment)
Use the (+) and (-) buttons to adjust the accel-
eration amount.
"0" : No acceleration
"100" : Maximum acceleration (Approximately 1/2 of the forward side
steering angle)
2 (Brake side acceleration amount adjustment)
Select setup item "BRAK" by pressing the (DN)
button once and use the (+) and (-) buttons to
adjust the acceleration amount.
"0" : No acceleration
"100" : Maximum acceleration (Brake side maximum steering angle)
3 (3rd channel brake side acceleration amount adjust-
ment)
If the Brake Mixing is being set, the 3rd channel
brake side acceleration will become adjustable.
Select "BRAK (3CH)" by (UP) or (DN) button and
adjust acceleration amount by (+) or (-) button.
Throttle acceleration (TH-ACCEL (Throttle system)
Dial / Trim Setting
The throttle acceleration adujustment amount (FOWRD) , (BRAKE) and 3rd channel
(BRAKE) can be controlled with button trim BT1, BT2 or digital trim DT3 etc. with
the function select dial function. (See page 80)
4 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.