Futaba 3VCS - Manual (Page 104)

105
Reference
PHONE
TZ-FM
RF.MODULE FOR TRANSMITTER
Changing to Ratchet Type Throttle Stick
Changing the throttle stick from the self-return type to ratchet type that stops at an
arbitrary position (To make this modification, the optional ratchet plate must be pur-
chased.)
Case mounting screws 1. Remove the RF module and Ni-
Cd battery from the transmitter
2. Remove the four case mount-
ing screws.
3. Remove the rear case.
4. Remove the swing arm and
spring from the throttle stick as
shown in the figure.
5. Install the ratchet plate to the
throttle stick.
Throttle Stick
Swing arm
Spring
Ratchet plate
Fasten by twisting with needle nosed pliers.