Futaba 3VCS - Manual (Page 94)

95
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the or button to
select the setup item.
* blinks at the current
setup item.
(Initial screen)
MENU
Setup items
1: Function assigned to button No. 1
2: Function assigned to button No. 2
3: Function assigned to button No. 3
4: Function assigned to button No. 4
5: Function assigned to button No. 5
6: Function assigned to button No. 6
Direct call function assignment
1 (Function assignment)
Use the (DN) or (UP) button to select the button
to be assigned and use the (+) or (-) button to
select the assigned function.
(Repeatedly set for buttons you want to assign at
item 1 above.)
2 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Direct call/DIRC-CALL
* 1~6 are buttons used at direct call.
1 2 3
4
5
6
You can directly call the "DIRECT CUSTOMIZE" screen by pressing the (UP) but-
ton and (DN) button at the same time for more than 3 seconds. In order to return to the
Initial screen, press (END) button once.