Futaba 3VCS - Manual (Page 47)

48
Functions
4 (Cycle speed adjustment)
Select setup item "CYC" by pressing the (DN)
button once and use the (+) and (-) buttons to
adjust the speed.
- The lower the set value, the faster the cycle speed.
5 (Operation point setup)
Select set item "THP" by pressing the (DN) but-
ton twice, and use the (+) and (-) buttons to set
the operation point.
- Sets the throttle trigger position at which the A.B.S. function is per-
formed. The number is the % display with the brake position made 100.
6 (Cycle duty ratio setup)
Select setup item "DTY" by pressing the (DN)
button once, and use the (+) and (-) buttons to
adjust the duty ratio.
"-3" : Brake application time becomes shortest. (Brakes lock with difficulty)
"+3" : Brake application time becomes longest (Brakes lock easily)
(Remark) For low grip, set at the - side and for high grip, set at the + side.
7 (Steering mixing setup)
Select setup item "STM" by pressing the (DN)
button once, and use the (+) and (-) buttons to
set the steering mixing range.
- Sets the range within which the A.B.S. function is performed relative to
steering wheel operation.
N50%
L(E) N R(E)
L(E) N 50% 50%
50%
A.B.S.
A.B.S. A.B.S.
50%
R(E)
E50%
N50%
A.B.S. operation range indicated
by *
E50%
A . B . S o p e r a t i o n
A . B . S o p e r a t i o n
Cycle speed
1 ~ 30
Initial value; 10
Operation point
10 ~ 100
Initial value; 30
Duty ratio
-3 ~ 0 ~ +3
Initial value; 0
Steering mixing
OFF, N10 ~ N100, E10 ~ E100
Initial value; OFF
8 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
A.B.S. Function