Futaba 3VCS - Manual (Page 54)

55
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the or button to
select the setup item.
* blinks at the current
setup item.
(Initial screen)
MENU
Brake mixing/BRAKE MIXING (Throttle, 3rd channel system)
Setup items
MODE
: Function ON/OFF
BKRT : 3rd channel brake rate
EXP : 3rd channel brake-EXP
DLY : Delay amount
CH3ABS : Function ON/OFF
ABP
: CH3ABS brake return
amount
DLY : CH3ABS Delay amount
Use this mixing when the front and rear brakes must be adjusted independently such
as 1/5GP cars, etc. This mixing uses the 2nd channel to control the rear brakes and the
3rd channel to control the front brakes.
It is possible to adjust the Brake Return Amount (ABP), Delay Amount (DLY) and
Cycle period (CYC) exclusively for the front brake (the 3rd CH). In doing so, you can
use the A.B.S. Function at the front side even if the A.B.S Function is off for the rear
brake (2nd CH). You can use the same procedure as the 2nd CH " A.B.S Function for
setting the Cycle Period (CYC), Duty Ratio (DTY) and Steering Mixing (STM).
When the ON/OFF switch of the A.B.S Function is set by the Function Select Switch,
the A.B.S. Function will turn on or turn off both the front and rear brakes simulta-
neously.
Brake mixing/BRAKE MIXING (Throttle, 3rd channel system)
Operation
- When braking, mixing is applied to 2nd channel 3rd channel.
- 3rd channel brake rate, delay amount, 3rd channel brake-EXP and 3rd channel
brake-A.B.S possible.
Button trim setup
The function select trim function can control 3rd channel brake rate (BKRT), delay
amount (DLY), and 3rd channel brake-A.B.S return amount (ABP) ...etc setting
using button trim BT1 and BT2 and dial trim DL3. (See page 80)
Brake mixing mode : ON 3rd channel brake-A.B.S : ON