Futaba 3VCS - Manual (Page 51)

52
Functions
(Initial screen)
Use the or
button to select the
menu screen.
Press the button.
Use the or
button to select the
function.
Press the button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the or button to
select the setup item.
* blinks at the current
setup item.
(Initial screen)
MENU
Start Function, Engine Cut/AT-START(Throttle system)
When the throttle stick is set to full throttle simultaneously with starting when the
track is slippery, the car wheels will spin and the car will not accelerate smoothly.
When the Start function is activated, merely operating the throttle stick slowly causes
the throttle servo to automatically switch from the set throttle position to a preset
point so that the tires do no loose their grip and the car accelerates smoothly.
Without Start function
Wheels spin
- Car does not accelerate
With Start function
Tires grip the track firmly
- Car accelerates
Start Function Operation
- When the throttle stick is moved to the preset position (throttle position: TH.P), the
throttle servo moves to the preset position.
- When the throttle stick is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
- This function is effective only for the first throttle stick operation at starting. This
function has to be activated before every start.
- When the throttle stick is returned slightly, the Start function is automatically deac-
tivated and the set returns to normal throttle stick operation.
Engine Cut Function
When the switch is pressed, the throttle servo will move to the preset position without
regard to the throttle stick position. This is convenient when used to cut the engine of
boats, etc. (The function select switch function. See page 82)
Start Function, Engine Cut/AT-START(Throttle system)
Function selection
First, select the function at the
"MODE" item.
"AT&SW"
: Strart function
"SW" : Engine Cut function