Futaba 3VCS - Manual (Page 12)

13
Before Using
- Start function (AT-START)
When the throttle trigger is set to full throttle simultaneously with starting on slippery
roads, the wheels spin and the vehicle does not accelerate (start). Setup the start
function allows smooth starting.
- Steering speed (ST-SPEED)
"When you sense that the steering servo is too fast, etc., the servo operating speed
(direction that suppresses the maximum speed) can be adjusted.
- Racing timer (TIMER)
A lap timer can record 99 lap times and the total time. The timer can also be started
automatically by trigger operation. The race time and an audible alarm can be set. A
navigation timer effective during training runs is provided. Target lap and refueling
time can be indicated by audible alarm. Other timers are an up timer and a down
timer.
- Digital trim
The trim position is constantly displayed on an LCD screen. The operation amount of
1 step can also be adjusted. Steering and throttle trim operations have no effect on the
maximum steering position.
- Function select dial function (FUNC-DIAL)
This function assigns a function to trimmers (digital trim, button trim, knob). The
step size and operating direction can also be adjusted. Trim positioning at each model
call is unnecessary because all the dials are digital.
- Function select switch function (FUNC-SW)
This function assigns functions to the two installed switches. The operating direction
can also be set.
- Black antenna
- Tension adjustment function
Stick tension can be adjusted from the outside.
- Adjustable Throttle Stick Travel (Mechanical ATL)
- Display switch
Functions can be set without emitting radio waves.
- Receiver w/DSC is standard equipment (Connection cord is option.)
HRS system: R203HF, PCMN type: R113iP
- 7-color LED pilot lamp
You can select your favorite color.