Futaba 3VCS - Manual (Page 63)

64
Functions
Timer/TIMER
Navigation timer setup
(Preparation)
- Use the function select switch function (See page 82) to
select the switch.
- Select "LAP NAVIGATE" at setup item "TYPE".
Setup items
RST : (Indicates the reset state.)
ALRM: Alarm setup
PRAL : Prealarm setup
TYPE : Timer selection
LAP
: Navigation alarm setup
Switches
LAP STA: Start/navigation alarm re
start
LAP RES: Stop/reset
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to
the initial screen.
Alarm time
OFF, 1 ~ 99 m
Initial value: 4 m
Prealarm time
OFF, 1 ~ 30 s
Initial value: 5 s
Lap NAVI alarm time
3 s ~ 30 m
Initial value: 3 s
Setup item switching
- Use the (DN) and (UP) buttons to switch the setup item.
1 (Alarm time setup)
Select setup item "ALRM" by pressing the (UP)
button twice, and use the (+) and (-) buttons to
set the alarm time.
2 (Prealarm time setup)
Select setup item "PRAL" by pressing the (DN)
button once, and use the (+) and (-) buttons to
set the prealarm time.
3 (Lap navigation alarm time setup)
Select setup item "LAP" by pressing the (DN)
button twice, and use the (+) and (-) buttons to
set the lap navigation alarm time.
4(Linking start with the throttle stick)
Select setup item "RST" by pressing the (UP)
button twice, and press the (+) and (-) buttons
simultaneously for about 1 second. A PeePee
sound is generated and "RST" > "RDY" blinks at
the timer display and the system enters the RDY
state. Throttle stick operation starts the timer.
5 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
(Timer start/lap navigation alarm restart operation)
The switch (LAP STA) preset by function select switch function performs the timer
start/lap navigation alarm restart operation. Only start is linked with the throttle stick.
(Timer stop/reset operation)
The switch (LAP RES) preset by function select switch function performs the timer
stop/reset operation. It resets the timer when operated in the timer-stopped
* Timer display
Status display
RST
: Reset state
RDY : Throttle stick operation wait
RUN : Timer running
STP : Timer stopped