Altera 100G Development Kit, Stratix IV GT Edition - Manual (Page 9)

September 2010 Altera Corporation 100G Development Kit, Stratix IV GT Edition Reference Manual
2. Board Components
Introduction
This chapter introduces all the important components on the Stratix IV GT 100G
development board.
Figure 2–1 illustrates major component locations and Table 2–1
provides a brief description of all features of the board.
1 A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Stratix IV GT 100G development kit installation
directory.
f For information about powering up the board and installing the development kit
software, refer to the
100G Development Kit, Stratix IV GT Edition User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Stratix IV GT Device” on page 2–6
■ “MAX II CPLD EPM2210 System Controller” on page 2–11
■ “Configuration, Status, and Setup Elements” on page 2–17
■ “Clock Circuitry” on page 2–24
■ “General User Input/Output” on page 2–29
■ “Flash Memory” on page 2–33
■ “SSRAM” on page 2–35
■ “Components and Interfaces” on page 2–38
■ “Power” on page 2–65