CIRCUTOR CIRLAMP Series - Manual (Page 22)

 Alarms: current status of the node. Two states are possible, see Table 7 :
Table 7: Alarms�
Status
OK No alarms
FAIL Node fault
NB: There is an application for iOS and Androids for positioning the nodes.(CirLAMP NODE
Location)
There are two buttons in the lower part of the table, with the following functions ( Table 8 ):
Table 8: Buttons on the table of units�
Button Function
Update Updates the current content of the table of units.
Clean the nodes table
Removes all nodes that are not active (Status: PF )
from the CirLAMP Manager database.
If the nodes reconnect to the network at a later date,
they will automatically appear in the table of units.
To access all the information available relating to a node, click on the row for the selected unit.
See “4.6.3.1. Node information menu”
4�6�3�1� Node information menu
All the parameters of a CirLAMP Node can be viewed and configured from this screen.
The menu varies depending on the type of user used to enter the web site ( Figure 16 and
Figure 17 ).
Figure 16:Node information menu (Write access user)�
22
CirLAMP system
Instruction Manual