CIRCUTOR CIRLAMP Series - Manual (Page 56)

4�6�9� CirLAMP MANAGER MENU: INPUTS AND OUTPUTS
This screen, Figure 58 , will only be available if CirLAMP Manager has the inputs and outputs
module ( M8I8O Expansion module).
Figure 58: Inputs and outputs�
Inputs:
This section shows the status of the eight inputs and the option to configure the function to send
a spontaneous event each time an input is connected.
Spontaneous events are sent via SOAP messages.
Outputs:
The operating mode for each of the outputs can be selected in the Mod� Work column:
 ON: Output is always activated.
 OFF: Output is always deactivated.
 AUTO: The output will be activated or deactivated depending on the configuration op-
tions assigned.
56
CirLAMP system
Instruction Manual