CIRCUTOR CIRLAMP Series - Manual (Page 41)

Container element: < L07/E07>
< L07/E07> is the container element for information relating to alarm adjustment:
Table 36:File E07-L07, element <L07/E07>
Attribute Description
ActDate Order activation date.
Container element: < Node>
< Node> is the container element for information relating to a node:
Table 37:File E07-L07, element <Node>
Attribute Description
nodeId Node identifier.
Container element: < Alarms>
<Alarms> is the container element for information relating to the adjustment of a node's
alarms:
Table 38:File E07-L07, element <Interval>
Attribute Description
blinkActive Threshold of active power for the intermittent bulb alarm.
blinkTime Blinking time for the intermittent bulb alarm (seconds).
blinkTimes Number of blinks for the intermittent bulb alarm.
blinkTotalTime Total blinking time for the intermittent bulb alarm (seconds).
brokenActive Threshold of active power for the burnt out lamp alarm.
brokenTime Alarm time for the burnt out lamp (seconds).
capacitorReactive Threshold of reactive power for the broken capacitor alarm.
capacitorTime
Broken capacitor alarm time (seconds).
powerLamp Lamp power
timeAlarm Alarm detection time (seconds).
percentageAlarm Minimum percentage to detect the alarm.
factorPower Minimum power factor to detect the alarm.
4�6�4�8� E08-L08, Delete nodes from the network
Format of file E08 ( Figure 39 ):
<Order IdReq=”E08” IdPet=”2” Version=”3�0”>
<CirLamp Id=”CIR0000001”>
<E08 ActDate=”20121114165000000W”>
<Node nodeId=”2000002”/>
</E08>
</CirLamp>
</Order>
Figure 39: File E08�
41 Instruction Manual
CirLAMP system