CIRCUTOR CIRLAMP Series - Manual (Page 9)

The units include:
- PLC (Power Line Communication) with the CirLAMP Manager on CENELEC Band B.
- Systems to detect a burnt out lamp, an open capacitor and a flashing lamp , and to gen-
erate an alarm.
- ( CirLAMP Node DN model) Relay output with ON/OFF control.
- ( CirLAMP Node DN model) Relay output to control the bi-level ballasts.
- ( CirLAMP Node 1 ��� 10V model) 1 to 10V output to control ballasts with a regulation
range from 1 to 10V.
- ( CirLAMP Node DALI model) DALI communications protocol to control ballasts .
3�- OPERATING PRINCIPLE
With the CirLAMP system it is possible to detect lighting anomalies, for example, burnt out
light bulbs, a blinking lamp, open capacitor, or control the useful life of each lamp, to ensure
correct maintenance of installations. When the CirLAMP system detects an incident, it sends
an email with detailed information.
To control lighting maintenance, the CirLAMP Manager has:
 PLC communication on CENELEC Band B with a DCSK system.
 Light point management through access by location.
( CirLAMP NODE Location application)
 Possibility of sending emails when a fault or incident is detected.
 Management of tasks and configuration orders sent to the CirLAMP Nodes�
 Regular reading of the status of alarms, voltage and powers.
 Memory event log.
 Ability to automatically download event files
 Astronomical clock to switch each light point on and off.
( M8I8O Expansion module)
Alarm management and external event control with the input and output module.
( M8I8O Expansion module).
9 Instruction Manual
CirLAMP system