CIRCUTOR CIRLAMP Series - Manual (Page 37)

Format of file L05 ( Figure 34 ):
<Report IdRpt=”L05” IdPet=”148” Version=”3�1”>
<CirLamp Id=”CIR0000000001”>
<L05 Fh=”20140310154742W”>
<Node Id=”1301250033” Fh=”20140310154733W” time=”0” power=”0”>
<Node Id=”1301316033” Fh=”20140310154734W” time=”0” power=”0”>
<Node Id=”1301316039” Fh=”20140310154735W” time=”0” power=”0”>
<Node Id=”1301316043” Fh=”20140310154737W” time=”0” power=”0”>
</L05>
</CirLamp>
</Report>
Figure 34: File L05�
Where:
Root element: <Report/Order>
<Report/Order> is the root element of the file. Its attributes indicate the data necessary to
process the file:
Table 24:File E05-L05, element <Report/Order>
Attribute Description
IdRpt/IdReq Report/order identifier.
IdPet Single identifier for the order.
Version Version identifier.
Container element: <CirLamp>
< CirLamp> is the container element for the report order:
Table 25:File E05-L05, element <CirLamp>
Attribute Description
Id CirLamp Manager identifier.
Container element: < L05/E05>
< L05/E05> is the container element for information relating to the work time interval:
Table 26:File E05-L05, element <L05/E05>
Attribute Description
ActDate Order activation date.
Container element: < Node>
< Node> is the container element for information relating to a node:
Table 27:File E05-L05, element <Node>
Attribute Description
nodeId Node identifier.
Container element: < Interval>
< Interval> is the container element for information relating to the work time interval:
37 Instruction Manual
CirLAMP system