CIRCUTOR CIRLAMP Series - Manual (Page 34)

Container element: < L02/E02>
< L02/E02> is the container element for information relating to the configuration of the tasks.
Container element: < TP>
< TP> is the container element for information relating to a task:
Table 16:File E02-L02, element <TP>
Attribute Description
TpTar Task identification number.
TpHi
Task start time. Format: YYYYMMDDHHmmssX
A : year, M: month, D: day, H: hour, m: minute, s: second
X: summer (S) or winter (W).
TpPer Frequency, time between queries. Format: YYYYMMDDHHmmss.
TpPrio
Task priority.
1 : Maximum priority. 2: Normal priority. 3: Low priority.
Container element: < TPPro>
< TPPro> is the container element for information relating to a report:
Table 17:File E02-L02, element <TPPro>
Attribute Description
TpReq Report created in this task.
TpSend
Indicates whether the report obtained is sent to the FTP server or not.
Y: The file is sent. N: The file is not sent.
TpStore Frequency, time between queries. Format: YYYYMMDDHHmmss.
4.6.4.3. E03, Update firmware
Format of file E03 ( Figure 30 ):
<Order IdReq=”E03” IdPet=”(UInt32)” Version=”3�1”>
<CirLamp Id=”CIR4600000001”>
<E03 ActDate=”20100101001500000W” Firmware=”(String)”/>
</CirLamp>
</Order>
Figure 30: File E03�
Where:
Root element: <Order>
Order> is the root element of the file. Its attributes indicate the data necessary to process the
file:
Table 18:File E03, element <Order>
Attribute Description
IdRpt/IdReq Report/order identifier.
IdPet Single identifier for the order.
Version Version identifier.
34
CirLAMP system
Instruction Manual