Baby Lock ProStitcher Version 14.04.0051 (BLPS2) Instruction and Reference Guide - Manual (Page 26)

Overview 4.7
Refresh
The Refresh button resets Pan and Zoom and
centers the design and crosshairs so both are visible
on the screen (Figure 4.18). Refresh does not
reposition so using it will not affect the placement of
the design.
Pan
If the Pan button is selected, dragging a finger across
the screen will pan the current view in the
direction of the drag (Figure 4.19). Pan affects the
view only and does not reposition the design.
Zoom
If Zoom is selected, dragging a finger in either a
downward or right-to-left motion will zoom the
current view outward so the view of the design
becomes smaller (Figure 4.20). Dragging a finger in
either an upward or left-to-right motion will zoom
the view inward to magnify the design. As with Pan
and Refresh, Zoom does not reposition or resize the
design.
Grid
Turn the grid on or off by pressing the Grid button
(Figure 4.21). Depending on the zoom level,
the lines may indicate either 1-inch or ¼-inch
gradations. If the zoom level is such that both dark
and faded grid lines are visible, the darker lines
indicate 1-inch gradations and the faded lines are ¼
inch gradations.
Figure 4.18
Figure 4.19
Figure 4.20 Figure 4.21