Leprecon Litescape dimmer - Manual (Page 15)

Installation of the LWD-2400 Litescape™ Dimmer
Litescape User’s Manual Page 13
Power Connections
Power can enter from either the top or bottom. There are no punch-outs provided in either panel. The
installer is expected to punch the desired opening.
The LWD-2400 is pre-wired to distribute the input regardless of which entry point is used. Refer to the
connection drawing below. For top entry power, connect the X, Y, Z, NEUTRAL and GND at the top of the
drawing. For bottom entry power, use the lower set of connections.
LWD-2400 Front View