Leprecon Litescape dimmer - Manual (Page 62)

Litescape User’s Manual, Page 46
The Master Fader and the Single ZONE Fader Panel
The 3, 6 and 12-Fader panels have a separate MASTER fader. When setting ZONE levels using the
ZONE faders, the MASTER fader is also observed and used to adjust the ZONE fader’s level. This can be
troublesome when trying to “recapture” a ZONE that is at 100% but the MASTER fader is less than 100%.
In that case, it will be impossible to recapture the ZONE until both the MASTER and ZONE faders are set
to 100%, at least momentarily.
In the case of the 1-Fader panel, there is no MASTER fader, and the single fader is acts on behalf of
ZONE 1.