Leprecon Litescape dimmer User Manual
Page 39
QuickStart Procedures—Triggers
Litescape User’s Manual, Page 23
6
Press the right arrow key 3 times to advance to the hour field. Use the up or down arrow to change
the displayed hour and AM/PM to the correct value of one or two minutes before the missed trigger
time. Press
ENTER to save the change.
7
Adjust minutes as needed by using the right arrow to move to the next field, use the up/down arrow
keys to change the number displayed in the field, and press
ENTER to save the change.
8
Allow enough time to pass so that the lights are triggered successfully.
9
Repeat the above steps to edit the time back to the current time.
10 If the system memory needs to be locked, follow steps 1 to 3 above, then press the up arrow key
once so that
Locked is blinking in the display.
11 Press the left arrow key repeatedly until the MAIN MENU is displayed.