Leprecon Litescape dimmer - Manual (Page 9)

Litescape User’s Manual Page 7
Features And Specifications of the Litescape™ Architectural Series Houselite System
General: Wall Panel configurations based on user system needs:
1, 3, 6 or 12 Faders; 1, 3, 6 or 12 Presets, Master fader, Priority Keyswitch.
Wall Panels mount in standard electrical boxes.
Simple, clean panel layout. No visible fastners
Interconnected using CAT 5 cable.
Environmental: Ambient: -20 to 40 degrees C.
Humidity: 0 to 95% relative, non-condensing.
Rooms: System supports 8 independent Rooms, with up to 12 wall panels per system.
Each Room has 12 unique Zones and 12 unique Presets.
Room assignment set by the switch on the back of each panel.
Zones: 12 Zones per Room.
From 0 to 48 dimmer channels can be assigned to any Zone via dimmer menu
system.
Presets: 12 Presets per Room.
From 0 to 12 Zones can be assigned to any Preset.
Multiple Presets (in any Room) can control the same Zone.
Expansion: Up to 12 panels in a system
Cue Stack: Independent internal scenes are piled-on to presets or zone levels.
Priority: Each Wall Panel is jumper selectable as a High or Low Priority.
Priority state is controlled by Keyswitch in the system, or set directly from the
LWD menu system
Auxiliary Inputs: Each Wall Panel can accept two external inputs to trigger advanced features.
Auxiliary input is a normally-open connection, and becomes active when the
input device connects the contact closure to a ground pin provided by the Wall
Panel.