Lynx Studio E44 - Manual (Page 45)

45
From the top of the board going downward, the channel associated with each pot is:
Analog In 1
Analog In 2
Analog In 3
Analog In 4
Analog Out 1
Analog Out 2
Analog Out 3
Analog Out 4
For the input channels, a clockwise rotation of the trimpot corresponds to a decrease in
allowable input level (increased sensitivity). For the output channels, a clockwise rotation of
the trim pot corresponds to an increase in output level.
To set Input Trim levels, send reference tones to the input and calibrate with the meters in the
Lynx Mixer, or some other accurate software reference meter.
For outputs, generate tones from within a computer application and measure the level from
an outboard metering device.