Lynx Studio E44 - Manual (Page 50)

50
9 Specifications
Analog I/O
Lynx E44 Four input channels / four outputs channels
Lynx E22 Two input channels / two output channels
Type Electronically balanced or unbalanced, XLR connectors
Level +20dBu full-scale or variable +8.23dBu to +24dBu full-scale; jumper selectable
Input Impedance Balanced mode: 24 kΩ
Unbalanced mode: 12 kΩ
Output Impedance Balanced mode: 100 Ω
Unbalanced mode: 50 Ω
Output Drive Capability 600 impedance, 0.2 µF capacitance
A/D and D/A Type
24-bit, multi-level, delta-sigma
Sample Rates All standard sample rates up to 192kHz
Analog In Performance
(Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
Frequency Response
20 - 20 kHz, ± 0.05 dB
Dynamic Range 117 dB, A-wtd.
Channel Crosstalk <-120 dB, 1kHz signal@-1dBFS
THD+N -111 dB (0.0003%) @ -1 dBFS
1 kHz signal, 22Hz - 22kHz BW
Analog Out Performance
(Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
Frequency Response
20 - 20 kHz, ± 0.05 dB
Dynamic Range 120 dB, A-wtd.
Channel Crosstalk <-120 dB, 1kHz signal @ -1dBFS
THD+N -108 dB (0.0004%) @ -1 dBFS
1kHz signal, 22Hz - 22kHz BW
Digital I/O
Number / Type
Lynx E44 Four input channels / four outputs channels
Lynx E22 Two input channels / two output channels
24 bit AES/EBU or S/P DIF format jumper selectable, transformer coupled, XLR connectors
Sample Rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Clock I/O
Number External: one input and output, BNC connectors on Sync Cable
Internal: one input and output on board-mounted headers
Level / Impedance TTL / 75 Ω
Type Word clock
On-board Digital Mixer
Channel Capacity 16 input channels, 8 sub outputs
Monitor Mixing 16 x 8 with no limitations
Metering Peak levels to -120 dB on all inputs and outputs