Lynx Studio E44 - Manual (Page 49)

49
8.6.2 Sync Port
The Sync Port is a female, high-density 15-pin D-connector with the following connections:
Pin Signal Pin Signal
1 none 9 Digital Out 1 Hot
2 none 10 Digital In 1 Cold
3 Digital In 2 Hot 11 none
4 Clock In Hot 12 none
5 Digital In 1 Hot 13 Digital Out 2 Hot
6 Ground 14 Clock Out Hot
7 Digital Out 2 Cold 15 Digital Out 1 Cold
8 Digital In 2 Cold Shell Ground
Please note: for the E22 card, there is no Digital In 2 or Digital Out 2. Those pins are not
utilized.
8.6.3 Header Connectors
The LStream 2 port is a 14 pin header shrouded in black plastic labeled CLKIN and
CLKOUT.
Each are two-pin headers shrouded in black plastic. For both connectors, Pin 1 carries the
clock signal and Pin 2 is a ground signal. Pin 1 is located on the left side of each connector
when viewing the component side of the board.