Shinko plc, Available plcs, Communication setting – Hakko MONITOUCH V7 series User Manual
Page 305: Available memory, Shinko plc -98, Available plcs -98, Communication setting -98, Available memory -98, Available plcs communication setting
5-98
16. SHINKO PLC
16. SHINKO PLC
Available PLCs
Communication Setting
The recommended communication parameter settings of the PLC and the V7 series is as follows:
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
Only D register of SELMART is available. No other devices can be used.
Be sure to note the above though the setting on the V-SFT editor is possible.
Select PLC Type
PLC
Unit/Port
Connection
SELMART
SELMART-100 and later
Version O1M2-UCI-6
RS-232C [Wiring Diagram 1]
Item
Setting on PLC
V7 Comm. Parameter Setting
Baud rate
19200 bps
19200 bps
Parity
Even
Even
Transmission code
Data length
7 (ASCII)
7
Stop bit
1
1
Sumcheck
Provided (fixed)
−
Memory
TYPE
Remarks
D
(data register)
0