Hakko MONITOUCH V7 series - Manual (Page 284)

5
11. Allen-Bradley PLC 5-77
Co
nne
c
tio
n
to P
L
Cs
1770-KF2
SW1 (Protocol)
SW2, SW3, SW4 (Port)
Set the port number of 1770-KF2. (This port should not be duplicated in the network.)
SW5 (Network link communication speed)
Adjust to the settings of the network you are using.
SW6 (asynchronous link communication speed)
Adjust to the settings of the V7 series.
SW7 (Network link selection)
SW8 (RS-232C/RS-422 selection)
No Setting Contents
1 ON Protocol
2 OFF Protocol
3 ON Duplicated message unacceptable
4 OFF Handshaking signal ignored
5 OFF Protocol
Switch Setting
Contents
1 2
ON ON 57.6 kbps
No Setting Contents
1 OFF
9600 bps 2 ON
3 ON
4 ON Execution of diagnosis command
Switch Setting
Contents
1 2
ON OFF Peer transmission link
Switch Setting
Contents
1 2
OFF ON RS232C
ON OFF RS422