Modicon plc, Available plcs, Communication setting – Hakko MONITOUCH V7 series User Manual
Page 327: Available memory, Modicon plc -120, Available plcs -120, Communication setting -120, Available memory -120, Available plcs communication setting
Advertising
5-120
23. MODICON PLC
23. MODICON PLC
Available PLCs
Communication Setting
The recommended communication parameter settings of the PLC and the V7 series is as follows:
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
Select PLC Type
PLC
Unit/Port
Connection
Modbus RTU
Modbus RTU
Modbus
RS-232C
[Wiring Diagram 1]
Item
Setting on PLC
V7 Comm. Parameter Setting
Baud rate
9600 bps
9600 bps
Port
1
1
Parity
Even
Even
Transmission code
Data length
8
8
Stop bit
1
1
Memory
TYPE
Remarks
4
(holding register)
0
3
(input register)
1
0
(output coil)
4
1
(input relay)
6
Read only
Advertising