Hakko MONITOUCH V7 series User Manual
Page 301
5-94
15. SIEMENS PLC
TI500/505 (TI500/505 V4)
*1 In case of using DCP (drum count/setting value), set drum step No.1 to 16.
The assigned memory is indicated when editing
the screen as shown on the right.
* Notes on V4 (or GD-80) data conversion
• When converting data of V4 (or GD-80) into the V7 data, [TI500/505 V4] is automatically
selected for the PLC type.
• With V4 (or GD-80), the order of words is reversed in the case of double-words. Please
take note of this.
Memory
TYPE
Remarks
V
(variable memory)
0
WX
(word input)
1
WY
(word output)
2
X
(discrete input)
3
Y
(discrete output)
4
CR
(control relay)
5
TCP
(timer, counter/set value)
6
TCC
(timer, counter/current time)
7
DCP
(drum count/set value)
8
*1
DCC
(drum count/current value)
9
Read only
DSP
(drum step/set value)
10
DSC
(drum step/current value)
11
K
(fixed memory)
12
STW
(system state)
13
Example: DCP3000 : 1
Drum step number
Colon
Address
For V4 (or GD-80):
For V7:
MSB
LSB
High-order word
Lower-order word
1 word
2 words
MSB
LSB
Lower-order word
High-order word
1 word
2 words