Fatek automation plc, Available plcs, Communication setting – Hakko MONITOUCH V7 series User Manual
Page 323: Available memory, Fatek automation plc -116, Available plcs -116, Communication setting -116, Available memory -116, Available plcs communication setting
5-116
21. FATEK AUTOMATION PLC
21. FATEK AUTOMATION
PLC
Available PLCs
Communication Setting
The recommended communication parameter settings of the PLC and the V7 series is as follows:
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
Select PLC Type
PLC
Unit/Port
Connection
FACON FB series
FACON FB series
FB-DTBR
RS-232
[Wiring Diagram 1]
[Wiring Diagram 2]
RS-422
[Wiring Diagram 3]
Item
Setting on PLC
V7 Comm. Parameter Setting
Baud rate
9600 bps
9600 bps
Parity
Even (fixed)
−
Transmission code
Data length
7 (fixed)
−
Stop bit
1 (fixed)
−
Memory
TYPE
Remarks
HR
(data register)
0
DR
(data register)
1
X
(input relay)
2
Y
(output relay)
3
M
(internal relay)
4
S
(step relay)
5
T
(timer contact)
6
Read only
C
(counter contact)
7
Read only
RT
(timer/current value)
8
RC
(counter/current value)
9
DRC
(32-bit counter/current value)
10