Hakko MONITOUCH V7 series - Manual (Page 59)

2-2 1. Operation of V7 Main Menu
• Auto-uploading screen data from the CF card to the V7 unit
1) Transfer screen data from the computer to a CF card.
2) Turn the V7 unit off. Set the DIPSW1 on the V7 unit to the ON position, and insert
the CF card.
3) Turn the V7 unit on. The screen data is automatically uploaded from the CF card to
the V7 unit.
1. Main Menu Screen
• To bring up the Main Menu screen in the RUN mode, press the [SYSTEM] switch and
the [F1] switch.
• The Main Menu screen indicates the V7 series model, system information, and screen
data information.
• The Main Menu screen is the system menu screen for transferring screen data between
a personal computer and the V7 series. When transferring screen data from a personal
computer to the V7 series, this Main Menu screen must be displayed. (However, if
[Editor Port] is selected for [Modular Jack 1] or on-line editing is used, it is not
necessary to bring up this screen.)
BR
BR
BR
S Y S T E M
M O D E
B A C K
L T
BR
BR
BR
S Y S T E M
M O D E
B A C K
L T
2002-4 -1 07:23:30
SYSTEM PROG. VER. 1.000
FONT
VER.1.300 / 1.000 / 1.000
ENGLISH I/F DRV VER.1.240
MELSEC QnH Q
CPU Port
Editor:MJ1
Connection :
Signal Level :
PLC Stat. No. :
Multi-Link
RS232C
0 Baud Rate :
Data Length :
Stop Bit :
Parity :
Send Delay :
19200
8
1
Odd
20msec
Main Menu V 7 1 0 i T D
System Information
PLC Type : MITSUBISHIQnH(Q) series CPU
Comment : Screen Data
Information
Size : 5111808
SRAM/Clock Extension
RGB Adjustment Ethernet
Card
Menu
I/O Test
Error :
Time-Out :
Retry :
Stop
1.00 sec
3
Ethernet Information
Trans.Speed :
Stat. No. :
10BASE-T
192.168.1.68
Multi-Link2
Own Stat. No. :
Total :
Retry :
Baud Rate :
1
2
10
115200
PORT : 10000
MAC : 050FF000035
Main Menu screen