Emerson Process Management OXYMITTER 4000 IM-106-340 - Manual (Page 143)

Instruction Manual
IM-106-340, Rev. 4.0
May 2006
Oxymitter 4000
http://www.processanalytic.com
Section 11 Optional Accessories
HART Handheld 375 Communicator . . . . . . . . . . . . . . . . . page 11-1
Asset Management Solutions (AMS) . . . . . . . . . . . . . . . . page 11-2
By-Pass Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11-2
IMPS 4000 Intelligent Multiprobe Test Gas Sequencer . . page 11-3
SPS 4001B Single Probe Autocalibration Sequencer . . . page 11-4
O
2
Calibration Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11-5
Catalyst Regeneration . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11-6
HART HANDHELD 375
COMMUNICATOR
Figure 11-1. HART Model 375
Handheld Communicator
The HART Handheld 275/375 Communicator is an interface device that
provides a common communication link to HART-compatible instruments,
such as the Oxymitter 4000. HART Communications Protocol permits all the
information available from the Oxymitter 4000's electronics to be transmitted
over standard 4-20 mA signal wires. By attaching the HART handheld
communicator at a termination point along the 4-20 mA signal line, a
technician can diagnose problems and configure and calibrate the Oxymitter
4000 as if he or she were standing in front of the instrument.
For more information, call Emerson Process Management at 1-800-433-6076.
o
HART Communicator
MAN 4275A00
English
37260059