Emerson Process Management OXYMITTER 4000 IM-106-340 - Manual (Page 37)

Instruction Manual
IM-106-340, Rev. 4.0
May 2006
1-19
Oxymitter 4000
NOTES:
(1) Recommended uses: High velocity particulates in flue stream, installation within 11.5 ft (3,5 m) of soot blowers or heavy salt cake buildup. Applications:
Pulverized coal, recovery boilers, lime kiln.
(2) Where possible, specify ANSI or DIN designation; otherwise, provide details of the existing mounting plate as follows:
Cont’d
Code Operator Interface (3)
1 HART with Membrane Keypad - blind cover
2 HART with Membrane Keypad - window cover
3 HART with Local Operation Interface, window cover, English only
Code Language
1 English
2 German
3 French
4 Spanish
5 Italian
Code Termination Filtering
00 Specified as part of Electronic Housing
Code Calibration Accessories
00 No Hardware
01 Calibration Gas Flowmeter and Reference Air Set
02 Intelligent Multiprobe Sequencer (Refer to Table 1-3)
Code Electronics to Probe Cable
00 No Cable
10 20 ft (6 m) Cable
11 40 ft (12 m) Cable
12 60 ft (18 m) Cable
13 80 ft (24 m) Cable
14 100 ft (30 m) Cable
15 150 ft (45 m) Cable
16 200 ft (61 m) Cable
Cont’d 1 3 00 01 00 Example
Plate with studs Bolt circle diameter, number, and arrangement of studs; stud thread; and stud height above mounting plate.
Plate without studs Bolt circle diameter, number, and arrangement of holes; thread; and depth of stud mounting plate with accessories.